Photoluminescence

HomePhotoluminescence

The best options for photoluminescent signage

Photoluminescent signage is one of S3Fsigns’ three major product lines. Available in our catalog are more than 66 predefined dimensions in 4 types of signal architecture. For any of these 264 combinations there are 1994 pictograms available. A multitude of signs and formats for integration in our clients’ projects …

In addition to these pre-defined formats and pictograms, we also have the possibility to produce customized Photoluminescent Signage, with dimensions, types of installation and pictograms defined by the customer.

The products in the S3Fsigns Photoluminescent line comply with International Standards UNE 23035/2003. This standard exceeds the requirement of all others applicable to non-specific environments, thus ensuring its compliance with the regulations in the area and with a substantial margin.

Resistance and durability

2mm thick rigid PVC, self-extinguishing, highly resistant and durable.

No toxins

It does not contain any toxic and radioactive products according to the European Standard EN 71-3

Photoluminescent properties

Our products are in compliance with Technical Note 11 SCIE (ANPC), NP 4386 and NP ISO 16069 and comply with International Standards DIN 67510-4, UNE 23035-4 and ISO 16069.

Fingerprint

with high quality inks, resistant to ultraviolet rays.

Signalization display

It is essential to adjust the size of the signage to the premises to ensure an effective safety signage. The size of the signal should be as much as the typical observation distance.
Photoluminescence

Alturas de instalação

The signs must be placed according to their location and depending on the characteristics of the buildings. It is important that all signs are clearly visible, in order to reach all points in the surrounding area.
Photoluminescence

Photoluminescent signaling systems on evacuation routes

According to the definition of ISO16069 (SWGS), a complete signaling system comprises three distinct levels:

Higher level

Photoluminescent signage at the upper level (above 1.80m), for remote viewing

Intermediate level

Photoluminescent signage at the intermediate level (between 1.00m and 1.80m), with complementary information for reading.

Ground level

Photoluminescent signaling at ground level (below 0.40m), for signaling low escape routes.

The signs must be placed according to their location and depending on the characteristics of the buildings. It is important that all signs are clearly visible, in order to reach all points in the surrounding area.

Physical formats

The S3Fsigns Safety and Emergency Signs can be printed in 4 different physical formats.
Photoluminescence

Some examples of photoluminescent signage

PVC

Alumínio

Vinil

ELITE

ELITE 3D

S3F LUX

Need a budget?

Tell us what you need and we will meet your expectations!

ask for budget